Sewage backups and drain overflows in Beaver Creek are among the most hazardous water damage events a property can experience. Category 3 black water — raw sewage, backed-up drain lines, toilet overflows — carries bacteria, viruses, and pathogens at concentrations that make any contact a serious health risk. COS Water Damage Restoration's Beaver Creek sewage cleanup team is trained, equipped, and certified under IICRC S520 protocols for Category 3 biohazard remediation — from containment through full restoration.
📞 Call +1-844-499-0972 — Beaver Creek Sewage ResponseSewage cleanup in Beaver Creek is not a standard water damage job. The contamination levels, regulated disposal requirements, containment procedures, and sanitization standards that apply to Category 3 events are fundamentally different — and using a company without specific Category 3 training and equipment leaves your property and your household at risk.
COS Water Damage Restoration's Beaver Creek sewage cleanup crew operates under IICRC S520 standard — the industry's governing protocol for Category 3 contaminated water remediation. This covers the specific containment requirements, the PPE standards that protect our crew from pathogen exposure, the material removal requirements (what can be safely dried versus what must be removed and disposed of as a regulated waste stream), and the multi-application antimicrobial sanitization protocol that must be completed before any structural drying begins.
Proper disposal is a regulatory requirement, not a premium upgrade. It's standard on every Beaver Creek job.
After contaminated material is removed and Category 3 extraction is complete, every structural surface that contacted sewage water receives multiple applications of EPA-registered, hospital-grade antimicrobial and antifungal treatments. The sanitization sequence — spray application, dwell time, surface wipe-down, second application — is protocol-driven, not judgment-call driven. Our Beaver Creek crew follows the sequence on every surface, every time.
Our Beaver Creek claim coordinators handle the insurance piece. We can coordinate clearance testing when it's required.
Here's what our certified Beaver Creek Sewage Cleanup crew handles on every job.
The first action our Beaver Creek sewage crew takes on any Category 3 event is establishing negative-pressure containment — critical plastic sheeting barriers that prevent sewage contamination from spreading into unaffected areas of the property through airborne particles, foot traffic, and air circulation. Containment also controls odor migration within the property while remediation is underway. Simultaneously, we identify and coordinate the correction of the blockage or failure that caused the backup — whether that's a main line obstruction, a failed cleanout, or a sump failure — so that remediation isn't interrupted by a secondary event.
Extracting Category 3 sewage water from a Beaver Creek property requires specific PPE — full protective suits, respirators rated for biological hazard, and disposable boots — for every technician in the contamination zone. We use dedicated contaminated-water extraction equipment that is not shared with standard water damage jobs and is properly sanitized between uses. After extraction, all materials that contacted Category 3 water and cannot be decontaminated to a safe standard — carpet, pad, standard drywall, fiberglass insulation, and any non-cleanable surface materials — are removed as regulated waste, bagged in approved containers, and disposed of under TX biohazard material regulations.
Sanitization happens before drying equipment is staged. This sequence matters.
Odor neutralization is a final treatment step, not a product sprayed at the end to cover incomplete remediation.
Most TX homeowner's policies cover sewage backup events under a backup coverage rider. Our Beaver Creek claim coordinators are familiar with the specific documentation that backup claims require — including the distinction between backup events (covered) and sewer line failures (may require separate coverage) — and build your claim file from the first day to match what your carrier's adjuster will look for. We file the claim, coordinate the adjuster visit, and follow the settlement through. You focus on your household; we handle the insurance.
After Category 3 remediation is confirmed complete by instrument readings and — where required — by third-party clearance testing, our licensed Beaver Creek reconstruction team rebuilds your property: new drywall, fresh insulation, flooring, paint, trim, and any affected cabinetry or millwork. All reconstruction is performed to the same documentation standard as the remediation phase, providing a complete recovery record from sewage event to finished property that your insurance carrier and any future property transaction will find clear and complete.


Sewage events require immediate evacuation of affected areas. Our dispatcher will confirm this on the call.
Our Beaver Creek crew arrives in full Category 3 PPE with containment materials, dedicated contaminated-water extraction equipment, and sanitization products. Containment is established before extraction begins — no exceptions. After containment, we identify the source of the backup and coordinate correction if needed before the cleanup scope is assessed.
After initial containment and source control, our Beaver Creek project manager assesses the full Category 3 contamination extent, identifies all materials requiring removal, and prepares a written Xactimate-based scope covering extraction, material removal, sanitization, structural drying, and reconstruction. You review the scope and the cost before any material removal or treatment begins. If insurance is involved, the claim is filed the same day.
Extraction, material removal, multi-phase sanitization, structural drying, and reconstruction proceed under your approved scope. Daily progress updates keep you informed. Clearance testing is coordinated where required or requested. Final sign-off at a walkthrough with your project manager. Written satisfaction guarantee on every Beaver Creek job.



"We have a young child and a dog and the moment the sewage smell hit I knew this was something I couldn't handle myself. COS Water Damage Restoration's Beaver Creek team was there in under 60 minutes, contained the area so our family could stay in the upper floors, and handled every part of the cleanup in a way I trusted. The clearance testing they coordinated at the end gave me documented proof that the remediation was complete."
"Three years later, no odor, no mold, no recurring issues. COS Water Damage Restoration did the Beaver Creek sewage cleanup right the first time. I'm telling every neighbor I know to call them first."
"Managing a rental property in Beaver Creek means sewage backups occasionally happen, and the response you choose matters enormously because you have tenant health and habitability on the line. COS Water Damage Restoration handled a Category 3 event at one of our properties with complete transparency — documented scope before work started, clear removal decisions explained in writing, and a clearance certificate at the end that we could show our tenant as proof the property was properly remediated. The insurance claim was settled without any dispute."
COS Water Damage Restoration's certified Category 3 sewage cleanup team serves Beaver Creek and surrounding communities throughout TX. Call +1-844-499-0972 to confirm same-day service at your address.
Don't let an uncertified company handle a Category 3 sewage event in your Beaver Creek property. The health risk from incomplete remediation is real. Call +1-844-499-0972 — our certified Beaver Creek team handles it correctly.
📞 Call +1-844-499-0972 — Beaver Creek Sewage Response24/7 Response · IICRC S520 Certified · Category 3 Protocols · Beaver Creek, TX